The Ligno-Scanner S gives true wood moisture readings in percent with built-in corrections for different species.
Pinless moisture meters are usually calibrated for wood 3/4″ thick. The Ligno-Scanner S is set for 1/4″ deep, therefore it works great for all boards less than 3/4″ thick. The S also works for veneer wood, 1mm and up.
For thinner veneers we recommend measuring a stack of a few sheets.
The meter is sensitive to surface moisture so it can check waterborne finishes, veneer wood and can measure surface moisture.
||5-60% dependent upon species setting*
||0.1% resolution for the entire range.
||71 wood group settings, or simply use specific gravity of the wood, between 0.3 and 1.0 (setting 30-100)
||0-99 for non-wood building materials
||Stable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary.
||External calibration check block #TS is available to verify the calibration and functions of meter.
||Pouch, one 9V battery, manual and laminated wood group chart.
||Pocket-size 2″ x 5.5″x0.5″, Measuring pad 1 5/8″ x 2 5/8″
||8 ounces (200g), made out of high-impact plastic
||All moisture meters have a 2 year warranty. Pins and battery are excluded.