The Ligno-Scanner D is a pinless moisture meter that is convenient to use. The operation is simple with clearly marked buttons.
The large display shows moisture percentage, wood setting and measuring depth. Lignomat’s advanced measuring technology assures calibration accuracy. Every time the pinless moisture meter turns on, calibration is internally checked.
The pinless moisture meter uses built-in corrections for different wood species. Corrections can be programmed, just enter the specific gravity of the wood between 0.3 and 1.0. Resolution is 0.1% for entire measuring range. HOLD function is available for all pinless moisture meters from Lignomat.
The Ligno-Scanner D has a reference scale for testing non-wood materials. Works good for compare and search mode in restoration applications.
The standard measuring depth for pinless moisture meters is 3/4″. Likewise the Ligno-Scanner D measures at 3/4″. The pinless moisture meter will not measure any deeper than 3/4″.
| Specifications |
Measuring
Range |
5-60% dependent upon species setting* |
| Display |
0.1% resolution for the entire range. |
Species
Corrections |
71 wood group settings, or simply use specific gravity of the wood, between 0.3 and 1.0 (setting 30-100) |
Gypsum
Scale |
N/A |
Reference
Scale |
0-99 for non-wood building materials |
Calibration
|
Stable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary. |
| Calibration Check |
External calibration check block #TS is available to verify the calibration and functions of meter. |
| Included |
Pouch, one 9V battery, manual and laminated wood group chart. |
| Size |
Pocket-size 2″ x 5.5″x0.5″, Measuring pad 1 5/8″ x 2 5/8″ |
| Weight |
8 ounces (200g), made out of high-impact plastic |
| Warranty |
All moisture meters have a 2 year warranty. Pins and battery are excluded. |
