Mold Inspection Consulting and Remediation Organization
15 Years
close menu

Tramex CCIK Concrete Coatings Inspector Kit

The Tramex CCIK is the complete kit for instant, non-destructive, quantitative moisture content testing of concrete floors and ambient conditions and is the ideal non-destructive test kit for monitoring the most crucial information at the time of application.

More info

Tramex CCIK Concrete Coatings Inspector Kit
Roll over image to zoom Click image to expand
  • Tramex CCIK Concrete Coatings Inspector Kit

Alternative Products

  • Tramex CCTK Concrete Coatings Installer Tech Kit
    Tramex CCTK Concrete Coatings Installer Tech Kit

    $855.00

    Sign in to see Member Price

    Item #3311

The Tramex CCIK is the complete kit for instant, non-destructive, quantitative moisture content testing of concrete floors and ambient conditions and is the ideal non-destructive test kit for monitoring the most crucial information at the time of application.

The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete using Gravimetric testing as a baseline and comparative testing per ASTM F2659. Non-destructive testing of the top ¾” of the slab is most critical when applying coatings. An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the Tramex CMEX5 built-in hygrometer.

The Tramex Concrete Coatings Inspector Kit comes with an extension handle in a heavy-duty Tramex travel case. Bluetooth connectivity to the Tramex Meters App allows for visualization of readings and data reporting to mobile devices, to GeoTag test results, create, save and share photos, reports and charts, as well as see your meter screen on your phone when extending to hard to reach places.

Features:

  • Instant, non-destructive concrete moisture content test from 0 - 6.9% with CMEX II to ASTM F2659.
  • Fastest, most reliable Hygro-i ® RH probe for testing to ASTM F2170.
  • Perform multiple tests simultaniously.
  • Re-usable Hygro-i ® Relative Humidity probes prove to be the lowest cost per ASTM F2170.
  • Test ambient site conditions of Temperature, RH, Dew Point & Mixing Ratio.
  • Backlit display for ease of reading in low level lighting.
  • Check calibration of RH probes as often as required by standards.
  • Instant surface temperature readings to avoid condensation.

Kit Contents:

  • Concrete Moisture Encounter X5 -  CMEX5.        
  • Infrared Thermometer.    
  • Free App available for Android and iOS (phone not included).
  • Extension Handle.

Specifications:

CONCRETE MOISTURE ENCOUNTER X5  - CMEX5 - MEASURING RANGE:

  • Depth of penetration in concrete: approx.  ¾" (20mm)
  • Moisture content for Concrete: 0 → 6.9 %
  • Comparative for Gypsum floor screed: 0 → 12  
  • CM Equiv Anhydrite/Concrete: 0→2.7 / 0→4.3
  • Reference scale: 0 → 100
  • Relative Humidity (with optional Hygro-i2® probe):  0 → 99%                                   
  • Humidity accuracy: 0% to 99%RH +/- 2% @ 77°F/ 25°C   
  • Moisture content for wood (with optional wood pin probes): 5 → 30 %

INFRARED THERMOMETER IRT2

  • Temperature range: -58ºF ~ 1202ºF (-50 to 650 ºC)  
  • Distance to Spot ratio: D:S = 12:1
  •  Display resolution: 0.1 ºF(0.1ºC)   <1000 1ºC   >1000
  • Accuracy for targets: Assumes ambient operating temperature of 73 to 77ºF (23 to 25 ºC) -58ºF ~ 68ºF (-50 ~ 20ºC)  ±4.5ºF(2.5ºC) 68ºF ~572ºF (20ºC ~300ºC)   ±1.0% ±1.8ºF (1.0ºC) 572ºF ~ 1202ºF (300ºC ~650ºC)  ±1.5% 
  •  Repeatability: -58~68ºF (-50~20ºC)  :  ±2.3ºF(1.3ºC ) 68~1202ºF (20~650ºC): ±0.5% or ±0.9ºF (0.5ºC)
  •  Response time: 150ms
  •  Spectral response: 8~14um
  •  Emissivity: Digitally adjustable from 0.10 to 1.0
  •  Over range indication: LCD will show “----”
  •  Polarity: Automatic (no indication for positive polarity); Minus (-) sign for negative polarity
  •  Diode laser output: <1mW,Wavelength 630~670nm, Class 2 laser product
  •  Operating temp.: 32 to 122ºF(0 to 50ºC)
  •  Storage temp.: 14 to 140ºF (–10 to 60ºC)
  •  Relative humidity: 10%~90%RH operating, <80%RH storage
  •  Power supply: 9V battery, NEDA 1604A or IEC 6LR61, or equivalent
  •  Safety: “ CE ” Comply with EMC

SPECIFICATIONS OF KIT:

  • Size: 17.1” x 14.2” x 5.5” (43.5cm x 36cm x 14cm)
  • Weight: 6.8 lbs (3.1kg)
  • Power: 2 x AA batteries, 1 x 9 volt PP3 battery

Warranty

All Tramex products are built with highest quality components, calibrated by hand, to exeed best industry standard and to give the user many years of service.

We supply a full one year guarantee against defects in parts & workmanship.