| Distance Measurement |
| Typical measuring tolerance 1 |
±1.0 mm 3 |
| Maximum measuring tolerance 2 |
±2.0 mm 3 |
| Range At Leica Target Plate GZM26 |
100 m / 330 ft |
| Typical range 1 |
80 m / 260 ft |
| Range at unfavorable condition 4 |
60 m / 195 ft |
| Smallest unit displayed |
6 / 30 / 60 mm (10 / 50 / 100 m) |
| Ø Laser point at distances |
6 / 30 / 60 mm (10 / 50 / 100 m) |
| Tilt Measurement |
| Measuring tolerance to laser beam 5 |
±0.2° |
| Measuring tolerance to housing 5 |
±0.2° |
| Range |
360° |
| General |
| Laser class |
2 |
| Laser type |
635 nm, < 1 mW |
| Protection class |
IP54 |
| Automatic laser off |
After 90 seconds |
| Automatic power off |
After 180 seconds |
| Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03 |
Up to 5,000 measurements |
| Size (L x W x D) |
127 x 56 x 33 mm |
| Weight (with batteries) |
158 g |
| Temperature range Storage operation |
-25°C to +70°C (-13°F to +158°F) |
| -10°C to +50°C (14°F to +122°F) |
| Calibration cycle |
Tilt and compass |
| Maximum altitude |
3000 m |
| Maximum relative humidity |
85% at 20°F to 120°F (-7°C to 50°C) |
| Safety |
IEC Standard No. 61010-1:2001 |
| EN60825-1:2007 (Class II) |
| EMC |
EN 55022:2010 |
| EN 61000-4-3:2010 |
| EN 61000-4-8:2010 |
1. Applies for 100% target reflectivity (white painted wall), low background illumination, 25°C.
2. Applies for 10 to 500% target reflectivity, high background illumination, -10°C to +50°C.
3. Tolerances apply from 0.05 m to 10 m with a confidence level of 95%. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m and to 0.15 mm/m for distances above 30 m.
4. Applies for 100% target reflectivity, background illumination between 10'000 lux and 30'000 lux.
5. After user calibration. Additional angle related deviation of ±0.01° per degree up to ±45° in each quadrant. Applies at room temperature. For the whole operating temperature range the maximum deviation increases by ±0.1°. |
