The gas detector PCE-GA 12 is a very easy-to-use measuring device. This gas detector detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected by the gas detector. Thanks to the semi-rigid hose on the gas detection device, the sensor can be aligned in almost any position to reach even inaccessible places.
This makes the gas detection device an ideal measuring device for employees who want to detect sporadically escaping gases (testing of plants during a tour of the plant, checking engines and supply lines, testing gas supply lines). A manual setting of the gas detector is not necessary as the gas detector automatically calibrates.
- Audible alarm with 85 dB
- Rechargeable battery for mobile use
- Automatic calibration
- Measuring range up to 10000 ppm
- For the detection of combustible gases
- Durability of the sensor about 5 years
- Vibrating alarm when detecting gases
- Sensor changeable
||At low concentration 0 ... 1000 ppm
|(only for methane)
||At high concentration 0 ... 10000 ppm
||Volume: 85 dB
||< 10 ppm (with methane)
||< 2 seconds
||Measurement of combustible gases
||on the LC display, bar graphs
||Polymer Li-ion battery 18500 3.7V
||Primary side: 100 ... 240V, 50/60 Hz, 0.2 A
||Secondary side: 5V, 1 A
||Turns off if the battery capacity is too low
||by itself or after 10 minutes if not used.
||About 5 years (sensor is interchangeable)
||Semi-rigid 400 mm / 16"
||About 430 g / < 1 lb
What's In The Box:
- 1 x Gas detector PCE-GA 12
- 1 x Charger
- 1 x User manual