| Channel |
Two with LCD display and Backlight |
| Input |
Sensor: Capacitive for Humidity and semiconductor for Temperature |
| Relative Humidity |
| Measurement Range |
3 to 98.0% RH |
| Accuracy |
±2%RH + 1 ct (10 to 90%HR) |
±4%RH + 1 ct (outside this range) |
| Resolution |
0.1%RH |
| Temperature |
| Sensor |
Semiconductor |
| Measurement Range |
14.0° to 140.0°F |
-10.0° to 60.0°C |
| Accuracy |
50.0° to 104.0°F: ±2.5°F + 1 ct |
10.0° to 40.0°C: ±0.5°C + 1 ct |
| Resolution |
0.1°F |
0.1°C |
| Dew Point |
| Measurement Range |
14.0° to 140.0°Ftd |
-10.0° to +60.0°Ctd |
| Accuracy |
±1.8°F >30%
±2.7°F from 20 to 30%RH |
±1°C >30%
±1.5°C from 20 to 30%RH |
| Resolution |
0.1°F |
0.1°C |
| Recording |
Manual start/stop on the product
Short press for MEM: spot recording/long press for REC at the defined default rate
Programmed recording: start date, recording interval, and end date defined using DataView® software |
| Alarm |
Alarm threshold settable on teh software / Recording can be triggered on an alarm threshold |
| MIN-MAX-HOLD |
yes |
| Sampling Rate |
Programable from 1s, 2s, 5s, 10s, 20s, 30s, 2min, 5min, 10min, 15min, 30min, and 1hr |
| Memory |
1,000,000 measurements on each channel (4MB). Recorded data is stored in non-volatile memory and will be retained even if battery is low or removed. |
| Communication |
USB 2.0 and Bluetooth 4.0 BLE range 10m typicall |
| Power Source |
3x1.5V AA (LR6) alkaline batteries or USB port (micro-USB adaptor offered as an accessory) |
| Battery Life |
1000 hrs., 3 years when recording with 15 minute intervals |
| Dimensions: |
7.36 x 2.84 x 1.28" (187 x 72 x 32mm) |
| Weight (with battery) |
14.1oz (400g) with batteries |
| Case |
Polycarbonate |
| Operating Temperature |
14° to 140° F (-10° to 60°C) |
| Storage Temperature |
-4° to 140° F (-20° to 60°C) |
| Relative Humidity |
Up to 90% |
| Ingress Protection (IP) |
IP54 with USB connector closed and protective cap in place |
| EMC |
EN 61326-1 |
| Safety Compliance |
IEC 61010-1 |
| Warranty |
2 years |
