Mold Inspection Consulting and Remediation Organization
Since 2006
close menu

Kanomax 2212 IAQ Monitor

Test multiple IAQ parameters with one unit.

More info

Kanomax 2212 IAQ Monitor
Roll over image to zoom Click image to expand
  • Kanomax 2212 IAQ Monitor

Test multiple IAQ parameters with one unit.


  • Simultaneously measures multiple parameters such as: CO, CO2, Temperature, RH, to monitor IAQ
  • Calculates Dew Point, Web Bulb Temperature, Absolute Humidity, Humidity Ratio and % Outside Air
  • The 2212 simplifies the labor involved and eliminates the need to purchase and learn multiple instruments
  • Easy user self-calibration
  • The monitor can also check CO2 levels and determine the rate of exchange, or the % of outside air, being introduced to a building per ASHRAE standard 62
  • Examines building IAQ conditions to optimize worker productivity
  • NIST Traceable Calibration Certificate*
  • Features quick start-up and high accuracy in measuring CO2 and CO concentration levels in the environment
  • Sampling function records multiple point measurements


Measurement Specifications
Range 0 to 500PPM
Accuracy +/-3% of reading or +/-3PPM whichever is greater
Resolution 0.1PPM: 0-99PPM 1PPM: 100-500 PPM
Range 0 to 5000PPM
Accuracy +/-3% of reading or+/-50PPM whichever is greater
Resolution 1PPM
Range – 4 to 140F (-20 to 60C)
Accuracy +/- 1F (+/-0.5C)
Resolution 0.1F (0.1C )
Relative Humidity
Range 2 to 98%RH
Accuracy 2 to 80%RH:±2%RH, 80 to 98%RH:±3%RH
Resolution 0.1%RH
General Specifications
Normal Mode Normal measuring (do not store and calculate the data.) Relative humidity, CO, CO2, Dew point, Wet bulb temperature, Absolute humidity and Humidity Ratio
Calculation Mode Store the data, and calculate the maximum, minimum and average value.
% OA Mode Measure ventilation ratio (Ask for ventilation ratio by calculating from temperature and CO2 value)
Data Output Mode Perform re-calculation of stored data and output of data to PC and Printer.
Calibration Mode Perform the calibration of CO and CO2.
Digital RS232C
Analog (option) DC 0 to 1V
Power Supply
  6x AA Batteries
Analog (option) DC 0 to 1V
Unit 3.4″ x 7.4″ x 1.6″
Probe Length: 12.5 inch / Diameter: 1.0 inch
  1.2 lbs (500g))
What’s included
  Meter, Operation manual, AA batteries, Probe stand, Probe,
Calibration cap, Connection tube, Data processing software (DPS), RS-232C
cable, Carrying case, NIST TRACEABLE CALIBRATION certificate. Optional Serial – USB adapter and AC adapter available.