| Channel |
One with LCD display and Backlight |
| Input |
Detachable silicon (Si) sensor Class C Lightmeter per NF C 42-710 |
| Accuracy |
±3% of R on incandescent sources (default mode)
±6% of R on LEDs (3000K to 6000K)
±9% of R on florescent sources |
| Accuracy with compensation |
LED mode: ±4% of R (at 4000K)
Flou mode: ±4% of R (type F11, 4000K) |
| Resolution |
0.1lux from 0.1 to 999.9lx
1lx from 1000 to 9.999lx
10lx from 10.00klux to 99.99klx
100lx beyond |
0.01fc from 0.01 to 99.99fc
0.1fc from 100.0 to 999.9fc
1fc from 1.000 to 9.999fc
10fc beyond |
| Recording |
Manual start/stop on the product
Short press for MEM: spot recording/long press for REC at the define default rate
Programed recording: start date, recording interval, and end date defined using DataView® software |
| Other functions |
MIN-AVG-MAX-HOLD |
| Sampling Rate |
Programmable from 1s, 2s, 5s, 10s, 20s, 30s, 2min, 5min, 10min, 15min, 30min, and 1hr |
| MAP mode |
The MAP mode can be used to map the lighting on a surface of a room. In this case the measurements are saved in the same file |
| Memory |
1,000,000 measurements on each channel (4MB). Recorded data is stored in non-volatile memory and will be retained even if battery is low or removed. |
| Communication |
USB 2.0 and Bluetooth |
| Power Source |
3x1.5V AA(LR6) alkaline batteries or USB port (micro-USB adaptor offered as an accessory) |
| Battery Life |
500 hrs., 3 years with 15 minute intervals |
Dimensions: Case
Sensor |
5.9 x 2.84 x 1.28" (150 x 72 x 32mm)
2.64 x 2.52 x 1.38" (67 x 64 x 35mm) |
| Weight (with battery) |
12.2oz (345g) with batteries |
| Case |
Polycarbonate |
| Operating Temperature |
14° to 140° F (-10° to 60°C) |
| Storage Temperature |
-4° to 140° F (-20° to 60°C) |
| Relative Humidity |
Up to 90% |
| Ingress Protection (IP) |
IP50 with USB connector closed and protective cap on the sensor |
| EMC |
EN 61326-1 |
| Safety Compliance |
IEC 61010-1 |
| Warranty |
2 years |
