- Inspection Tools & Equipment
- Airflow Meters
- Air Sampling Pumps & Media
- Dataloggers
- Gas Detection Monitors
- Headlamps, Flashlights, & Work Lights
- Hygrometers & Humidity Meters
- Thermometers
- Inspection Equipment Packages
- Miscellaneous
- Moisture Inspection Kits
- Moisture Meters
- Particle Counters
- Pelican Storm Cases
- Psychrometers
- Thermal Imaging Cameras
- Remediation Tools & Equipment
- Air Movers
- Air Scrubbers
- Carpet Extractors
- Containment Systems
- Dehumidifiers
- Filters & Accessories
- Flex Duct for Air Scrubbers
- HEPA Vacuums
- Miscellaneous
- Insulation Removal Vacuum
- Mold Chemicals
- Pressure Meters
- Remediation Equipment Packages
- Tools
- Safety Equipment
- Adhesive Pads
- Clothing
- Eye Protection
- Fall Protection
- First Aid Kits
- Hand Sanitizers & Hand Cleaners
- Gloves
- Hard Hats
- Harley-Davidson® Safety Line
- Hearing Protection
- Hi-Vis Apparel
- Knee Pads
- Masks & Respirators
- OSHA Signs, Safety Signs & Accessories
Products & Equipment: The Micro Store
Micro Store -> Remediation Tools & Equipment -> Air Scrubbers -> Abatement Technologies PAS2400 HEPA-Aire¨ Portable Air Scrubber
Abatement Technologies PAS2400 HEPA-Aire¨ Portable Air Scrubber
)
(Click to enlarge)
Exceptional performance and a full array of user-friendly features have made the Abatement Technologies® PAS2400 Portable Air Scrubber a popular choice for capturing airborne particles during construction restoration projects. With peak tested airflow of up to 2,100 cfm, and a maximum static lift of 5.5”, it’s the highest output Portable Air Scrubber that is NRTL-certified to operate safely on a 120 V/15 amp electrical supply.
Specifications:
- Rated Airflow* - 700-2,100 cfm
- Air Changes Per Hour - 6 ACH in areas up to 18,000-21,000 ft³
- Net Weight with Filters - 170 pounds
- Dimensions (L x W x H) - 31.50”L x 25.25”W x 49.75”H
- Power Supply Requirements - 120 VAC, 60Hz, 15 amps
- Normal Operating Current - 12 amps or less (safe for 15A circuits)
- Electrical Safety - NRTL-certified to comply with UL Std. 507 & CAN/CSA Std. #C22.2 No. 113-M1984 for electrical safety
- Motor - High-efficiency type, 3,450 RPM, 1.5 HP
- AT Gold Blower - Anodized-Aluminum, 5.5” peak static lift
- Controls - Off/High/Low speed selector switch, green power indicator lamp, separate amber ‘Replace Pre-filter’ and ‘replace HEPA’ lamps, hour meter, resettable pop-out 12A circuit breaker
- Cabinet Material - 20 gauge stainless steel construction with solid, aircraft-type rivets
- Built-in Dolly - Two-wheel dolly with 10” solid, non-marking rubber rear wheels, 360° swivel front casters and a secure top handle for easy movement & control
- Easy to Replace Pre-Filters - Hinged and latched pre-filter access door with a full perimeter gasket seal to protect against dirty-air bypass
- Pre-Filter Mounting - Separate slide-in compartments for up to 3 pre-filter stages
- Filters:
- Stage 1 pre-filter - Inexpensive, 1”-deep FIBER-TRAPPER® 1.0 pre-filter for larger particulates (100+ microns); can be washed & reused, or treated as a disposable
- Stage 2 pre-filter - Pleated, 2”-deep filter for medium-sized particulates (10-100 microns)
- Stage 3 pre-filter (not included) - High-capacity 2"-deep VAPOR-LOCK® carbon filter for gases & odors
- Final stage HEPA filter - High-capacity, for 0.1-10 micron particles, certified test efficiency of 99.97% or higher @ 0.3 microns, metal-frame
- Inlet/Outlet Manifold - Molded slide-in plastic manifold for attaching 12” inlet or outlet ducting (one included)
Price: $3319.00
(Member Price: $3,252.62)
